Bambu Lab PETG HF
PETG with a higher-flow formulation for fast PETG printing on Bambu hardware
Listed values and ratings are starting points, not verified test results. Formulations, prices, test methods and printer settings vary. Confirm details on the manufacturer page below.
Food-contact suitability cannot be determined from material type alone. Bambu Lab states that PETG HF is not food-grade and advises against food storage or contact. The manufacturer also says this product is discontinued and will not be restocked once sold out. Manufacturer safety tips. Check the exact product's manufacturer guidance and the finished part's intended use.
Where it shines
PETG with a higher-flow formulation for fast PETG printing on Bambu hardware.
Common use cases: outdoor, structural, transparent.
Where it falls short
Dry before use; manufacturer advises against food contact.
Print profile starting point
- Nozzle temp: start at 245°C and tune ±5°C for surface finish.
- Bed temp: 60°C is usually enough for adhesion; go up toward 80°C if first layer struggles.
- Drying: 65°C for 6 hours is a listed starting point; follow the current manufacturer guidance for your spool and dryer.
We link directly to the manufacturer where possible. Some retailer links may be affiliate links; we only ever link to products we'd recommend regardless.
Compare materials, learn about storage and printing, or return to the filament database.