Fillamentum CPE HG100
Premium PETG-like with cleaner clarity, less stringing, and better impact
Listed values and ratings are starting points, not verified test results. Formulations, prices, test methods and printer settings vary. Confirm details on the manufacturer page below.
Food-contact suitability cannot be determined from material type alone. Check the exact product's manufacturer guidance and the finished part's intended use.
Where it shines
Premium PETG-like with cleaner clarity, less stringing, and better impact.
Common use cases: outdoor, transparent, engineering.
Where it falls short
Premium price for what's still functionally a PETG-class material.
Print profile starting point
- Nozzle temp: start at 250°C and tune ±5°C for surface finish.
- Bed temp: 70°C is usually enough for adhesion; go up toward 100°C if first layer struggles.
- Drying: 65°C for 6 hours is a listed starting point; follow the current manufacturer guidance for your spool and dryer.
We link directly to the manufacturer where possible. Some retailer links may be affiliate links; we only ever link to products we'd recommend regardless.
Compare materials, learn about storage and printing, or return to the filament database.