Polymaker PolyMide PA6-CF
Carbon-fiber-reinforced nylon — stiff, strong, dimensionally stable. Engineering-tier
Listed values and ratings are starting points, not verified test results. Formulations, prices, test methods and printer settings vary. Confirm details on the manufacturer page below.
Food-contact suitability cannot be determined from material type alone. Check the exact product's manufacturer guidance and the finished part's intended use.
Where it shines
Carbon-fiber-reinforced nylon — stiff, strong, dimensionally stable. Engineering-tier.
Common use cases: engineering, structural, high-temp, automotive, drone-frames.
Where it falls short
Hardened nozzle required (CF abrasive); needs hot enclosure; aggressive moisture absorption.
Print profile starting point
- Nozzle temp: start at 290°C and tune ±5°C for surface finish.
- Bed temp: 60°C is usually enough for adhesion; go up toward 90°C if first layer struggles.
- Drying: 95°C for 12 hours is a listed starting point; follow the current manufacturer guidance for your spool and dryer.
- Enclosure: may help reduce warping; follow the manufacturer's guidance. An enclosure does not replace ventilation.
We link directly to the manufacturer where possible. Some retailer links may be affiliate links; we only ever link to products we'd recommend regardless.
Compare materials, learn about storage and printing, or return to the filament database.